[Specifications]

Print method	Direct thermal
Max. label width	79.5mm 0.5mm
Effective print width	72mm
Print speed	220mm/sec.(max.) or 58 lines/sec.
Print head
Print density	576 dots/line or 8 dots/mm
Dot space	0.125mm
Print life	100km
Halt-on protection from over-heat	80c
Interfaces
Serial port	Dsub 25 pin connector, 19200 or 38400 bps baud-rate, none parity, 8 bits and 1 stop bit, supports RTS/CTS & XON/XOFF protocol.
Parallel port	36 pin Centronics connector., 8 bits parallel,support BUSY protocol
Cash drawer port	DC 24V/1A, 6 wires RJ-11 socket
Weight	1400g (without cable)
Dimensions	190mm(L) X 145mm(W) X 147mm(H)
Environment
Operating	0c ~ + 50c, 10%RH ~90%RH
Storage	-10c ~ +50c, 10%RH ~90%RH
Power supply
Input	100V ~ 240V AC, 50 ~ 60 Hz
Output	+24V DC/3.0A
Print font
ASCII code	12 x 24 dots, 1.25mm(W) x 3.00mm(H)
Graphic font	24 x 24 dots, 3.00mm(W) x 3.00mm(H)
Print commands	ESC/POS print commands set
Paper adopted	Direct thermal printing paper
Paper width	79.5mm 0.5mm
Max. roll diameter	83mm
Paper thick	53~60g/m2
Auto-Cutter	Life span: over 1,000,000 cuts